lunes, 9 de mayo de 2011

HP Toner Refill Kits - The Real Deal!


Did you just encounter defects with the printouts of your laser printer? If you're using a toner refill product for your HP Laser Jet 4300 laser printer don't put the blame on it and its budget pricing. Most likely, said print defect may have been caused by a wearing out consumable or a malfunctioning printer component - and not a third party toner refill product such as the HP LaserJet 4300, 4350, Q1339A Toner Refill Kit. So instead of getting hyped about getting a brand new replacement toner cartridge while regretting that you ever got talked into using a compatible toner for your printer, here's a look into different print quality defects you might encounter a long the way and the component causing print anomalies.

Smeared Toner. If toner appears to be smeared on paper, the fuser may not be heating properly or may have scratches on its roller. Now if toner is loose and does not melt on paper, then most likely the fuser is not functioning at all. This can be remedied through proper cleaning or you can also have your laser printer serviced.

Horizontal Black Streaks. Uniformly-spaced black lines appearing all over the page may be caused by a damaged fusing roller or drum.

Vertical Black Streaks. It could be that your toner cartridge is defective or toner has leaked into your laser printer in case outputs have black toner lining up on the edges of the paper.

Evenly Distributed Blotches. If you encounter uniformly-spaced black blotches or spots on the page, this may either be a symptom of drum abrasion or the accumulation of toner over the fusing roller.

All of these defects cannot be attributed to the HP LaserJet 4300 refill toner nor can print quality flaws be the work of a third party toner, unless it has been sourced out from unscrupulous vendors. Much like the OEM toner, the HP refill toner was produced under strict quality standards and underwent stringent testing in its production.

Incidentally, compatible toners supplied with the HP LaserJet 4300, 4350, Q1339A Toner Refill Kit have been engineered based on the particle configuration of OEM toner powder so that users are guaranteed of crisp, clear and razor-sharp prints at a high resolution potential of 1200 x 1200 dpi (dots per inch) and set speeds of 43 ppm (pages per minute). Likewise, the refill toner can generate comparable yields of 18000 pages since the bottled toner powder supplied with the kit has been loaded with the same gram load of toner as the OEM toner cartridge.

Don't give up on the cost benefits of the HP toner refill kit whenever print defects arise. It is unlikely for the refill toner to cause these flaws.








An online entrepreneur of more than 10 years, Steve Maul recommends Laser Tek Services, Inc's superior line of toner refill kits. Get guaranteed savings of as much as 90% off your printer supplies budget from the high quality toner refill kits of http://www.tonerrefillstore.com.


No hay comentarios:

Publicar un comentario